JUUPINE 3D Printer Accessories Filament Desiccant for Bambu Lab P1S P1P X1 X1C AMS,PETG PLA ABS TPU Filament Drying,Bambu Lab AMS Desiccant Keep Filament Dry.

Brand: Wefuit

Features:

• 【 Attention 】The use of desiccants can reduce the moisture of 3D printing filaments. Each package weighs approximately 23g. It should be noted that desiccants can only reduce the moisture content of consumables and cannot dry consumables that have already been dampened.
• 【When does it need to be replaced】If it is new, the desiccant will be a white powder. When the desiccant absorbs moisture, it gradually turns into a yellow,When the entire packaging turns yellow, it is necessary to replace,because it loses theability to keep the flament dry,We also recommend re drying theflament at this time.
• 【How to use】1. Please take 2-3 new desiccant bags, remove the plastic film from the desiccant;2. Fold the desiccant in half and Put it into the hole of AMS and cover it with a lid. 3.Close the AMS cover to keep the filament dry. Please ensure that the locking tabs on the AMS are closed to isolate the AMS from external air.
• 【Why do we need desiccants】The interlayer adhesion of wet flament will deteriorate,which directlyaffecting the printing quality, even prone to blockage during theprinting process, and diffcult to adhere to the hotbed and leads toprinting failure.Prevent the above situations from happening during printing, make printing smoother, save your time, and improve your happiness for your hobbies or work！
• 【All filament need it】These desiccants can be used not only for Bambu Lab 3D printers, but also for any user who uses filament.The damp filament loses its flexibility and is relatively fragile, making it prone to breakage during the printing process; And it can also cause inconsistencies in the extruded filaments, making dry filaments very important. Dry filaments can help you print better.

Details: Name:JUUPINE 3D printer accessories Filament desiccant for Bambu Lab P1S P1P X1 X1C AMS ,PETG PLA ABS TPU Filament Drying,Bambu Lab AMS Desiccant Keep Filament Dry. introduce:This filament desiccant is designed to enhance your 3D printing experience, with each pack weighing approximately 23 grams, effectively absorbing moisture from the filaments and preventing printing failures. When the desiccant turns from white to yellow, it reminds you to replace it in time to ensure that the filament is always in the best drying state. Easily insert the holes of Bambu Lab AMS, then cover the AMS lid to isolate external moisture, making the printing process smoother and more unobstructed. Whether you are a user of Bambu Lab or other brands of 3D printers, you can enjoy the excellent printing effect brought by dry filaments, reduce breakage and blockage, improve interlayer adhesion, and make your creative works more smoothly presented.

Part Number: Bambu lab Filament desiccant