2 Pack 50mm Garage Door Lock Long Throw Gate Shed/Door Lock for Garden Gate with 2 Keys

Step One: The lock should be fitted to the door or gate once it has been hung and all necessary adjustments have been made. The lock body should be mounted inside (secure side) of the gate, with just the barrel showing outside to prevent any tampering with the lock. Step Two: Work out the position the lock should be mounted and mark the center of the barrel position on the gate accordingly. The lock must be mounted with the cam holes in the bar facing downwards to avoid water ingress. The lock body should be no less 5mm from the edges of the gate and obviously the throw of the lock needs to reach across to secure the gate. Also Check on the other side of the gate to ensure the hole is in a suitable position. Step Three: Next drill a 26mm hole in the gate with the auger or flat drill bit. Make sure the hole is drilled level and straight for the best performance of the lock. Drill through until the central point of the drill bit protrudes out on the back and then finish the hole off from the back side to avoid splintering the timber. Specifications Material of Lock Cylinder: Copper Material of Lock Body: Iron Material of Square Bar: Iron Chrome Plated Material of Buckle: Iron Material of Key: Copper Material of Screw: Iron Package Includes 1 x Lock Cylinder 1 x Buckle 4 x Key 6 x Screw

• To suit the thickness is 2" (50mm) Doors & Gates, Long Throw Gate/Door Lock for Garden Gate,can be fitted on a right opening gate.
• Simple Installation: Each garden lock comes individually boxed with a mounting screws.
• Added security:made with 6 pin lock barrels. Ideal to be used as an extra shed or patio door security
• Multipurpose: Our Metal Gate Door Latch perfect for wood gates and fence, vinyl gate, it can also be installed in aluminum alloy doors or metal gates(Tips: Please replace professional hard screws).
• More Keys: Supplied with 2 keys in the box.